Ridgepoint Solutions

Exterior & Remodeling · Ridgepoint Solutions

Exterior and interior painting in Austin, TX

Paint lasts when the surface under it is clean, sound and dry. Every Ridgepoint painting job follows the same steps, inside or out: clean, repair, protect, prime, paint, and walk through it with you before we call it done.

Painter applying paint to an exterior wall

Our painting process

1. Power-washing on every exterior job

Dirt, chalking paint, pollen and mildew keep new paint from sticking. We wash exterior surfaces before any prep, then let them dry fully before paint goes on. Inside, walls are wiped down to remove dust and grease.

2. Prep and repairs

We scrape loose paint, sand rough edges, fill holes and cracks, and repair or replace damaged trim and siding where needed. Gaps at trim, windows and doors are re-caulked. Repairs are listed in your written scope before work starts.

3. Careful taping and masking

Trim, windows, hardware, outlets and fixtures are taped or masked so lines stay clean and paint goes only where it should.

4. Protecting floors and landscaping

Inside, floors and furniture are covered. Outside, we cover plants, beds, walkways and driveways, and move what can be moved.

5. Primer and paint

Bare wood, patches, repairs and stains get primer so they do not show through. Paint is then applied at the coverage the product calls for. Outside, we paint only in the temperature and weather the product allows. You choose the paint, or we suggest a product suited to the surface.

6. Walkthrough and cleanup

We walk the job with you, handle touch-ups on the spot, pull tape and coverings, and clean up and haul away job debris.

Interior painting

Wall being painted with a roller above taped trim and covered floor

Walls, ceilings, trim and doors. Where walls or ceilings were repaired, we patch, match the texture, seal stains and prime so the repairs do not show through the finish. After a roof leak, the stain must be sealed before paint; see interior repairs.

Painter rolling paint onto an interior wall

Exterior painting

Painter working on a building exterior from a ladder

Siding, trim, fascia, soffits, doors and fences. Central Texas sun and heat wear paint down, so exterior prep matters most: power-wash, replace rotted trim, renew caulk, prime bare wood, then paint when conditions allow.

Painting after repairs

If you are repairing a roof leak, siding or drywall, paint goes last. Doing it earlier means painting twice. We can price the repair and the painting together.

Questions people ask

Do you power-wash before exterior painting?

Yes, on every exterior job, and we let the surface dry before painting.

How do you protect my floors and plants?

Floors and furniture are covered inside; plants, beds and walkways are covered outside.

Can I choose the paint brand and color?

Yes. We can use your choice or suggest a product suited to the surface.

How long should I wait to paint after a repair?

It depends on the repair material. Drywall mud, primer and caulk all have drying times that we follow.

Can I stay home while you paint inside?

Usually, yes. We plan rooms and access with you.

Do I get a written price?

Yes. The scope and price are written before work starts.

Related services

Where we work

We serve Austin and ten surrounding Central Texas cities, including Austin, Round Rock, Georgetown. Each city page has that city's permit rules and weather records. See all 11 service areas ›

Photos and write-ups of our work will appear on the projects page.

Our promise

Ridgepoint Workmanship Guarantee

A 10-year workmanship warranty on full roof replacements, and up to 1 year on repairs.

  • 10-year workmanship warranty on full roof replacements.
  • Up to 1 year of workmanship coverage on repairs.
  • This warranty covers our workmanship. Manufacturer or material warranties are separate and not part of it.
Read the guarantee terms ›

Get your free estimate

Free inspection and written estimate. Use the form, or call (737) 418-8832.

Request my estimate

Project planning

Set the paint scope before choosing the final color

Describe the surfaces and their condition

Interior trim, drywall, exterior siding and masonry do not all need the same preparation. Identify peeling areas, water marks and previous coatings so the scope can address the substrate rather than only the visible color. Moisture problems and damaged material need attention before a finish coat can be expected to perform.

Review boundaries in the room and outside

Confirm which doors, trim, ceilings and adjacent surfaces are included and how they will be protected. Compare color and sheen samples in the actual light before the final selection. Weather and surface conditions can affect exterior scheduling, so the application plan should follow the coating requirements rather than a calendar date alone.

Paint roller and tray prepared for interior coating work
Stock photo for planning reference; not a Ridgepoint project.
Close view of joint-compound finishing on an interior wall
Stock photo for planning reference; not a Ridgepoint project.
(737) 418-8832 Consultation