Ridgepoint Solutions

Roofing · Ridgepoint Solutions

Roof replacement in Austin, TX

A roof replacement removes the old roof covering, checks and repairs the deck underneath, and installs new underlayment, flashing and roof covering, then cleans up. This page covers the process and the decisions. The material comparison lives on the shingle, metal and tile pages.

Local details: roof replacement in Georgetown, Round Rock and Cedar Park. For a planning range, use the roof cost calculator or read the roof replacement cost guide.

Home with a dark metal roof

Signs it is time to replace rather than repair

  • Leaks in more than one place, or a leak that comes back after a repair
  • Shingles that are curling, cracking, or losing granules across whole slopes, not one spot
  • A deck that feels soft or sags between rafters
  • Widespread damage from hail or wind that touches most of the roof surface
  • Flashing, vents and sealants that are failing everywhere instead of in one place

If only one spot is failing, a repair usually makes sense; the roof repair guide walks through that decision.

What a replacement involves, step by step

  1. 1Inspection and written scope: we photograph the roof and write down what will be done and what it costs.
  2. 2Protection: we protect landscaping, the attic, and anything at the edges of the work area.
  3. 3Tear-off: the old covering and underlayment come off down to the deck.
  4. 4Deck check: the roof deck is inspected and damaged or deteriorated decking is replaced before anything new goes on. The Texas Department of Insurance's storm-repair guidance says the same.
  5. 5Underlayment, drip edge and flashing: the water barrier goes on first, then the metal edges and the flashing at valleys, walls, chimneys and penetrations.
  6. 6Roof covering: installed to the manufacturer's written instructions, because that is what a material warranty depends on.
  7. 7Ridge, vents and details, then cleanup including a magnet sweep for nails, and a walk-through with you.

Tear-off or a second layer

Roofing over the old roof is sometimes possible, but it hides deck problems and adds weight. Some cities set limits: Georgetown, for example, requires tear-off when there are two or more layers or when the old roof is tile, slate or shake. In general, a tear-off lets us see the deck, which is why we recommend it.

What drives the price

We do not quote a roof from the driveway. The written estimate reflects these factors:

  • Roof area and pitch, and how many valleys, dormers, skylights and penetrations it has
  • How many layers are on the roof now
  • How much deck needs repair once the old roof is off
  • The material you choose
  • Access, disposal, and any permit the city requires
  • Code items such as drip edge

Permits by city

Whether a re-roof needs a permit depends on the city. Georgetown and Buda list re-roofing as work that needs a permit; Round Rock, Cedar Park and Leander publish that a straight residential re-roof does not. Austin exempts most re-roofing but has a rule for the Wildland-Urban Interface area. Each city page links to the source. Always confirm with the city before work starts.

Choosing the material

If you are weighingRead
Architectural vs 3-tab, impact-resistant shingles, wind ratingsShingle roofing
Standing seam vs exposed-fastener vs stone-coated steelMetal roofing
One metal system in depthStanding seam metal roofing
Clay or concrete tileTile roofing

Warranties

Two different warranties apply. Our Ridgepoint Workmanship Guarantee covers the labor we perform: 10 years on a full roof replacement and up to 1 year on a repair. The material manufacturer's warranty is separate and has its own terms. Your estimate keeps the two clearly apart.

Paying for it

If you want to spread the cost, see roof financing options. Financing is subject to credit approval and approval is not guaranteed.

Paying over time

Financing options are available through lending partners. Financing is subject to credit approval and approval is not guaranteed. See financing options ›

Questions people ask

How long does a roof replacement take?

It depends on the size and complexity of the roof, the material, and the weather. Your written estimate includes the expected schedule. Rain delays are normal because we do not open a roof we cannot dry in.

Will you remove the old roof or install over it?

We recommend tear-off. It lets us inspect the deck, and some cities limit the number of layers. Georgetown requires tear-off for two or more layers and for tile, slate or shake.

Do I need to pay everything up front?

The payment schedule is written into your estimate. Texas Department of Insurance consumer guidance advises against paying in full up front and says to get a written agreement with no blanks, which is a good rule for any contractor.

What warranty comes with a new roof?

You receive the Ridgepoint Workmanship Guarantee, a 10-year warranty on the workmanship of a full replacement. The roofing material also carries the manufacturer's own warranty, which is separate.

Can I replace only part of my roof?

Sometimes, if the rest of the roof is sound and the new section can be tied in properly. Austin's Wildland-Urban Interface rules, for example, require a full replacement when 50 percent or more of the roofing is replaced. We tell you what applies to your address.

Related services

Where we work

We serve Austin and ten surrounding Central Texas cities, including Austin, Round Rock, Georgetown. Each city page has that city's permit rules and weather records. See all 11 service areas ›

Photos and write-ups of our work will appear on the projects page.

Our promise

Ridgepoint Workmanship Guarantee

A 10-year workmanship warranty on full roof replacements, and up to 1 year on repairs.

  • 10-year workmanship warranty on full roof replacements.
  • Up to 1 year of workmanship coverage on repairs.
  • This warranty covers our workmanship. Manufacturer or material warranties are separate and not part of it.
Read the guarantee terms ›

Get your free estimate

Free inspection and written estimate. Use the form, or call (737) 418-8832.

Request my estimate

Project planning

Prepare for a well-defined replacement

Decisions to settle before delivery

Confirm the material, color, flashing approach and ventilation scope before materials arrive. Review driveway access, where debris will be collected and which outdoor items need to move. If a skylight, gutter or rooftop accessory is staying, its connection to the replacement roof belongs in the conversation rather than being left to installation day.

Know how hidden conditions are handled

The condition of concealed decking cannot always be established from the roof surface. Ask how questionable areas will be photographed, how repair quantities will be recorded and when your approval is needed. Keep the final scope and any written changes with your home records so future maintenance starts with a clear account of the work.

Illustration of shingle roof repair work; not a Ridgepoint project
Illustrative example; not a Ridgepoint project.
Residential wood framing before the exterior enclosure is complete
Stock photo for planning reference; not a Ridgepoint project.
(737) 418-8832 Consultation