Ridgepoint Solutions

Resources · Roofing

Roof cost calculator for Austin, TX homes

Planning a new roof in the Austin area? Answer four questions to get a rough price range for a full replacement. It takes about a minute, and the inputs are things you already know.

Want the reasoning behind the numbers? Read the roof replacement cost guide for Austin.

Estimate your roof

I know my…

Planning range

–

This is a rough planning range, not a quote or an offer. It uses typical re-roof rates (tear-off of one existing roof included) and a simple roof-area formula, and it does not see your roof. Extra layers to remove, decking, flashing, ventilation, skylights, chimneys, code items, permits and access can move the price either way. Your written price comes only after an inspection and measurement.

Other systems: request a quote.

Get an exact written price

How to use the calculator

  1. 1Size: enter the ground-floor footprint plus any attached garage, or the roof area in squares if you have a measurement report.
  2. 2Pitch: choose how steep the roof is. Not sure? See reading your pitch.
  3. 3Material: pick the roof you are considering.
  4. 4Stories: taller homes take more setup.
  5. Removing the existing roof is included in the range. Other roofing systems are priced by quote.

What moves the price of a roof

  • Roof shapeValleys, hips, dormers and level changes add cuts, flashing and time.
  • SlopeA steeper roof has more surface and needs more safety gear.
  • DeckingSoft or rotten boards found during tear-off are replaced before the new roof.
  • PenetrationsChimneys, skylights, vents and walls each need flashing.
  • VentilationIntake and exhaust may need to be brought up to the right balance.
  • AccessTight lots, landscaping and steep driveways affect staging.

Choosing a material

  • Asphalt shingles: the most common choice for homes, with architectural and premium lines.
  • Standing seam metal: concealed fasteners and long panels; higher up front.
  • Metal roofing: including stone-coated steel profiles that look like shake or tile.
  • Tile: concrete or clay, heavy, and the structure must be checked.

Reading your roof pitch

Pitch is how many inches the roof rises for every 12 inches it runs. From the attic or a ladder at the eave, hold a level so it reads 12 inches flat from the roof surface, then measure straight up from the 12-inch mark to the roof. A 6-inch rise is a 6/12 pitch. Do not walk on the roof; we measure it during the inspection.

Paying for a new roof

Financing may be available through our lending partners, subject to credit approval. See financing.

From range to written price

The calculator cannot see your roof. A roof inspection measures the actual area and pitch, checks the deck and flashing, and ends with a written scope and price for roof replacement or, if it is enough, a repair.

Roofing cost questions

Is the calculator result a quote?

No. It is a planning range built from typical rates and a simple formula. Ridgepoint gives a written price only after inspecting and measuring the roof.

Why does it ask for home size instead of roof size?

Most people know their square footage but not their roof area. The calculator adds an allowance for overhangs and the slope of the roof to turn the footprint into an approximate roof area. If you already have a measurement report, choose roof area instead.

What is a roofing square?

A square is 100 square feet of roof surface. Roofing materials and labor are usually priced by the square.

What if I do not know my roof pitch?

Pick moderate, which covers many Central Texas homes, or see the pitch guide on this page. We measure the pitch during the inspection.

Is removing my old roof included?

Yes. The range is for a re-roof and includes tearing off one existing layer. More layers, or damaged decking found underneath, are priced after the inspection.

Why do stories change the range?

Taller homes need more staging and safety setup, which adds to the job even when the roof area is the same.

What is not included?

Rotten decking, extra flashing, skylights, chimneys, ventilation upgrades, gutters, permits and code items depend on your roof and are priced after the inspection.

Can I pay over time?

Financing may be available through our lending partners, subject to credit approval. See the financing page.

Ridgepoint Solutions

Get your free estimate

Call or text us for a free inspection and written estimate. We serve Austin and nearby Central Texas communities.

Call (737) 418-8832Email info@ridgepoint-solutions.com

Serving Austin and nearby Central Texas communities.

(737) 418-8832 Free estimate